|
|
June 19th, 2009
- Wire Russia
Moscow, Russia - Russian Shows Create Positive Impetus for Metallergy Industry
|
Despite the slump in global economic markets, exhibitors and visitors at Metallurgy-Litmash, Tube Russia, Aluminium Non-Ferrous 2009 and wire Russia 2009 rated the trade fairs as a source of positive impetus for the metallurgy industry. Held on 86,100 square feet of net exhibit space at the Expocentre in Moscow, the two trade fairs attracted 9,200 visitors from Russia and surrounding regions. Metallurgy Litmash, Tube Russia and Aluminium/Non-Ferrous 2009 featured 254 exhibitors from 29 countries, while wire Russia 2009 presented the products of 214 companies from 29 nations. Special highlights were the country group exhibits from Austria, China, France, Germany, Great Britain, Italy, Taiwan and the U.S.
Regardless of the economic crisis, Russia and its neighboring countries are among the fastest growing regions in the world. Demand for high quality products from international suppliers remains strong since state-of-the-art technology is still needed to upgrade existing facilities and investments are going ahead accordingly.
|
|
See
Extended Story..
|
April 15th, 2009
- Wire Russia
Vienna Austria - Meet with EDER Engineering GmbH/Ltd at Wire Moscow 2009.
|
 Like in 2003, 2005 and 2007, EDER Engineering-Austria will have a large Stand at Wire Russia 09, located in the Austrian Pavilion in Hall FORUM.
Being active in the former USSR for 53 (!) years already, Russia and the C.I.S. always have been excellent markets for both EDER´s advanced drawing die-tools and particularly for leading die-tool working machines,designed under over 60 years of specialization and as easy to understand and to operate conceptions.
|
|
See
Extended Story..
|
April 14th, 2009
- Wire Russia
Vienna, Austria - Austrian Wire and Cable Machinery Manufacturers Association will Participate at Wire Russia 09
|
 With 22 member companies and since 1988 under the lead of Dr. Kurt G. EDER, the
Austrian association will be present at „ Wire RUSSIA 09“ with a huge attractive “AUSTRIAN PAVILLION“ in hall Forum, jointly organised by the AWCMA and the Austrian Federal Economic Chamber and with a remarkable number of companies exhibiting therein as well as on adjacent individual stands.
The following AWCMA-enterprises will display their leading products and technologies for the C.I.S. wire- and cable industry there :
CERATIZIT - DUNST - EBNER - EDER - E.V.G - FILZMOSER – FORTUNA – ISOVOLTA - M.A.G. - MALI - MEDEK&SCHOERNER – VOEST ALPINE - AWCMA/VOEDKM ( all in the Austrian Group Pavillion) and the KDS Group (ROSENDAHL + NEXTROM)- at an adjacent individual stand.
|
|
See
Extended Story..
|
August 6th, 2007
- Wire Russia
Pischelsdorf, Austria - WIRE RUSSIA 2007 - Review Nextrom & Rosendahl
|
The Wire was a successful event, with many visitors, the people
visiting our booth where mainly key-people from Russia and CIS
– countries.
NEXTROM & ROSENDAHL can clearly distinguish
an increased fiber demand in Russia and in the CIS countries,
continuous discussions on existing projects and future ones
took place during the wire, covering the whole product range.
The extended market presence for Nextrom & Rosendahl in
Europe has made Russia one of our key-markets, and an object
for large investments. Several contracts where signed, which
confirms that Rosendahl and Nextrom made the right decision
when establishing a Russian Headquarter. A large interest in
the energy field was recognized, which illustrates a promising
future growth and success on these markets also within this
segment.
On behalf of the whole team of NEXTROM & ROSENDAHL,
we thank all our business colleagues who visited us during the
Wire in Moscow 2007.
You can find out more about NEXTROM & ROSENDAHL
with
this link.
|
|
|
June 20th, 2007
- Wire Russia
Moscow Russia - Maillefer & Gauder Group combine sales and marketing in CIS region.
|
 Maillefer's long established Moscow office returned to business as usual following an exceptional week at Wire Russia. Vitaly Meschanov and Alexander Chamov together with members of the Russian team hosted about 200 visitors representing more than 50 cable plants. Important negotiations and quality discussions kept Maillefer personnel and stand resources fully occupied. Significant deals totaling over 9 million Euros were made, the company said in a Wire Russia wrap-up release Tuesday. During the event, Maillefer and Borealis held a common seminar entitled Cabling Innovation. Antti-Jussi Rissanen made a presentation on the future of the cable industry in the CIS, while Jorma Leppanen presented the latest CV line innovations. Mr. Peshkov from the Electrocable and VNIIKP associations shared his thoughts on the latest developments and trends for the CIS cable industry. Maillefer occupied the stand location with representatives of the Gauder Group. Indeed, both companies have an agreement for combining sales and marketing efforts within the CIS region. This proved convenient during busy negotiations for common projects. Each company's individuality was highlighted by use of separate company colors on each side of the stand.
|
|
|
June 13th, 2007
- Wire Russia
Pischelsdorf, Austria - WIRE RUSSIA 2007 - Review Nextrom & Rosendahl
|
 The
Wire was a successful event, with many visitors, the people
visiting our booth where mainly key-people from Russia and CIS
– countries.
NEXTROM & ROSENDAHL can clearly distinguish an increased
fiber demand in Russia and in the CIS countries, continuous
discussions on existing projects and future ones took place
during the wire, covering the whole product range. 
The extended market presence for Nextrom & Rosendahl in
Europe has made Russia one of our key-markets, and an object
for large investments. Several contracts where signed, which
confirms that Rosendahl and Nextrom made the right decision
when establishing a Russian Headquarter. A large interest in
the energy field was recognized, which illustrates a promising
future growth and success on these markets also within this
segment.
On behalf of the whole team of NEXTROM & ROSENDAHL, we
thank all our business colleagues who visited us during the
Wire in Moscow 2007.
You can find out more about NEXTROM & ROSENDAHL with
this link.
|
|
|
June 1st, 2007
- Wire Russia
Moscow, Russia - Wire Russia 2007 - May 25-28
|
 Wire
Russia 2007 run by Messe Dusseldorf held in Moscow, Russia is
being held in conjunction with 3 other events, tube Russia 2007,
SHK Mockba, and Schweissen & Schneiden. This year wire Russia hosted
234 exhibitors from 29 countries on a net space of 4.508,75
sqm. Official group participation's included Germany, Italy,
France, Spain, U.S.A., Great Britain and Austria.
 The
attendance has been steady throughout the Wire Russia show with
the second and third days having the most, starting off a little
slower on the Monday and finishing with a crawl on Thursday.
Expectations of the organizer, Messe is over 10,000 visitors
throughout the 4 day show, May 28-31.
With temperatures over  30degrees
Celsius, it has been unusually warm in the city making it very
interesting to get to the show without perspiring too much.
The show however is organized well with air conditioning and
a clean atmosphere.
Russia has continued to grow and maintains a significant level
of business providing plenty of opportunity for the  wire
& cable industry. One interesting thing to note is the amount
of visitors who do speak english. 2 years ago in 2005, there
were noticeably few visitors who could speak in english - which
has changed in only 2 years.
Please check back soon for a complete overview of the show
with statistics of the show provided from the organizers.
|
|
|
May 4th, 2007
- Wire Russia
Bethersden, Kent , U.K. - PWM's Best-selling cold welder in action at wire Russia (stand F09)
|
Best-selling cold welder in action at wire Russia (stand
F09)
 PWM,
world-leading British designer and manufacturer of cold welding
equipment and dies, will exhibit its best-selling HP100 cold
welder at wire Russia 2007. This air/hydraulic model is increasingly
popular with wire and cable manufacturers because of its reliable
performance, durability and low maintenance costs. Capable of
welding non-ferrous wire and strip from 1.00mm to 5.00mm, the
HP100 has a solid steel welding head for added strength and
stability. Trolley-mounted for convenience and ease of use,
the HP100 is powered by an air/hydraulic intensifier easily
activated by a foot pedal. A longer hose can be fitted between
the welding head and the power source in order to make the welding
head portable. This enables welding to take place where space
is limited, at a strander lay plate, for example, or inside
a spooler casing.
Also on show will be PWM's range of manually
operated models. This includes the popular M101, a versatile
bench/trolley mounted machine with a capacity of 1.00mm to 3.60mm
copper and 1.00mm to 5.00mm EC aluminium; two bench mounted
models, and three lightweight, hand-held machines, ideal for
welding in confined spaces.
PWM's new Russian language website at www.pwmltd.co.uk
offers full details of PWM’s range of high performance
cold pressure welders and dies, a demonstration of the cold
weld process and a comprehensive Q&A section.
Press contact: Kris Lancaster
Tel: + 44 (0) 01304 366057
Email: kris@poetswalk94.freeserve.co.uk
|
|
|
April 7th, 2007
- Wire Russia
Valbrembo, Italy - Vitari S.p.A. exhibits at Wire Russia
|
 The
Vitari company is located in Valbrembo near Bergamo in the Milan
vicinity and since 1925, is designing and manufacturing innovative
machinery for the wire industry. Recognized leader in the industry
and now part of the Eurolls Group of companies it is able to
offer an extreme flexibility as well as an aptitude for the
development of innovative solutions which are not only technological
but permit economies of scale for the final end user.
Large is the range of machines which we manufacture, starting
from the  automatic
wire straightening and cutting-off machines, till all machines
for manufacturing nails, chains, chain link fencing, barbed
wire, dress-hangers etc. and all ancillary machines for the
various indicated productions.
The business organization of Vitari S.p.A. is present in Italy
and in nearly all the Countries of the five continents through
exclusive agents. An efficient after-sale assistance assures
the intervention in the whole world of skilled engineers with
the maximum timeliness. The continuous application in the studying
for updating and the making of always more modern and efficient
machines is the guarantee that Vitari S.p.A. will always be
in a position to offer the best to the qualified customers.
|
|
|
March 2nd, 2007
- Wire Russia
Wien, Vienna - Invitation to meet Eder Engineering at their stand in Wire Russia 07 - 1-G 01
|
Like
in 2003 and 2005, EDER Engineering-Austria will have a large Stand
at Wire Russia 07, located in the Austrian Pavilion again. Being
active in the former USSR since 1956, Russia and the C.I.S. always
have been excellent markets for both EDER´s advanced drawing
die-tools and particularly for leading die-tool working machines,
designed under over 60 years of specialization and as very easy
to understand and to operate conceptions.
The Russian wire and cable producing industry
is increasingly aware of the fact that only perfectly
produced and – beside these - perfectly repaired drawing
dies are drawing good wire and EDER-Austria is supporting them
with the right high degree automatic equipment to compensate increasingly
less human skills available in the die workshops. Single machines
for upgrading of an already existing infrastructure, completely
equipped die reconditioning workshops, but also complete die-tool
production lines in state-of-the-art technology are continuously
supplied to regular customers from Moscow down to Sibiria and
of course all under full valid GOST-R certification.
|
|
See
Extended Story..
|
March 1st, 2007
- Wire Russia
Vienna, Austria - Meet AWCMA at Wire Russia 207 - stand 1-G01
|
With 22 member companies and since 1988 under
the lead of Dr. Kurt G. EDER, the Austrian association will be
present at „ Wire RUSSIA 07“ with a huge attractive
“AUSTRIAN PAVILLION“, jointly organised by the AWCMA
and the Austrian Federal Economic Chamber and with a remarkable
number of companies exhibiting therein as well as on adjacent
individual stands.
|
|
See
Extended Story..
|
June 29th, 2005
- Wire Russia
Brantford, Ontario - Reviewing the 2005 Wire Russia Event
|
| Wire Russia ended last week with most exhibitors pleased at the overall show experience. While the real results will present themselves perhaps months from now with enquires and leads being followed up, the optimism about Russia continues. This being my first visit to Russia, I was quite naive to the dramatic difference in Russian culture, etiquette or lack there of, and personal correspondence. The business environment here in Russia does seem to be quite hostile to outsiders. The show set-up was a bit chaotic and scurried, but did pull together with a lot of class. The dignitaries opened up the show, and with a big relief, the show went on. Messe does know how to put on a show, and they did provide an excellent opportunity for business to culture and grow in this new environment for many.
|
|
See
Extended Story..
|
June 23rd, 2005
- Wire Russia
Moscow, Russia - Day 2 and 3 report in Moscow
|
| Day 2 and 3 have proven to meet most of the exhibitors expectations for attendance and interest. Although most people agree the visitor attendance was higher two years ago, the quality of those moving from booth to booth is good. Many good enquires and even some filled orders have been reported. The good weather and pleasant people have shown to raise spirits and the Russian economy is fulfilling the notions of a growing economy. The hunt now is on for many companies to secure good Russian agents and dig deep into this emerging market. Once again, Wire World was correct in the anticipation of good things in Russia with it´s fully translated site in Russian.
|
|
|
June 22nd, 2005
- Wire Russia
Moscow, Russia - First few days of Wire Russia
|
| The first day of Wire Russia was a little disapointing with very few visitors and a lot of confusion with set-up and the open ceremonies. But the 2nd day has been better attended and the atmosphere is very relaxed. The exibitors are high with anticipation for an opening in this very difficult market. Moscow has proven to be a harsh environment for foreigners both in travel and buisness. More information to come as we will get a good feel by the end of the show whether or not, Wire Russia 2005 proves to be a triump or not.
|
|
|
June 17th, 2005
- Wire Russia
LIMBURG/Lahn Germany - AUGUST STRECKER GmbH & Co. KG at Wire Russia in Booth No. 6B10
|
| Messrs. AUGUST STRECKER GmbH & Co. KG reputable manufacturer of buttwelding equipment for the wire and cable industry for more than 70 years, will again participate in this year's "WIRE RUSSIA 2005" and exhibit a choice of the extensive production program:
- Buttwelding machines for all kinds of ferrous or non-ferrous wires, including welders with automatic deburring cycle.
For steel wire welders, there are different annealing features available, depending on the individual steel quality. Here, the well-known programmable microprocessor controls are now also available with remote maintenance via modem!
- Buttwelders for stranded conductors working with or without any tubes (with automatic deburring!), in pneumatic or hydraulic executions.
- Machines for electrical parting as well as buttwelding of steelcord or steel strands.
- Coldpressure buttwelders with automatic deburring for non-ferrous materials.
- Wide specialized range for the most varied applications and special purpose machines.
You will find August Strecker in booth No. 6B10 as well as find out more about them with
this link.
|
|
|
June 16th, 2005
- Wire Russia
- WEBER & SCHER MFG. CO., INC. WIRE RUSSIA 2005 SHOW PREVIEW EDITORIAL
|
| Weber & Scher Mfg. Co., Inc., now in its 89th year of operation, specializes in providing equipment and technology specifically to the wire and cable industry on a worldwide basis. At Wire Russia 2005, Weber & Scher/AFA Industries will be offering information covering metal tape handling and ultrasonic splicing equipment, longitudinal forming equipment for smooth and corrugated metal tape; core wrap tape handling, application and binding equipment; Kevlar serving equipment; cable core pressure filling and flooding equipment for optical fiber cables and copper telephone cables; metal tape overlap seam bonding systems; multi-position tension controlled supply equipment, high speed rewind/repair equipment and cable pay-offs/take-ups. Finally, detailed information and video presentations will be available covering our unique continuous seam welded metal tape sheathing systems for coaxial cables, RF Cables, OPGW cables and power cables. Find out more about Weber & Scher Mfg. Co., Inc. with
this link. Found at Wire Russia - STAND NO. 7 – 4B05
|
|
|
June 15th, 2005
- Wire Russia
The Netherlands - Teijin Twaron present at Wire Russia 2005
|
| Teijin Twaron will promote its para-aramid fibers Twaron® and Technora® for protection of optical fibers in optical fiber cables (OFC). Twaron para-aramid fiber is used worldwide for reinforcement of all kinds of cables to protect the optical fiber against mechanical forces, chemical attacks and even water, in case you use the waterblocking version. The Technora para-aramid fiber is known for its high strength and differing color in the ripcord market which facilitates easy stripping of the outer jacket of an OFC in order to gain access to the inside of the cable.
|
|
See
Extended Story..
|
June 14th, 2005
- Wire Russia
Switzerland - Maillefer SA Wire Russia 2005 Booth Description
|
| Opening day visitors to Moscow’s Wire Russia will be arriving on the first day of summer in the capital city. At Maillefer stand 75 A14, the focus will be on LAN cable manufacturing, and Energy cable production. New model ECH crossheads are available for multi-layer constructions. The heads boast exacting design, productivity and operator friendliness. An ECH 4/6 SL for solid insulation will be on display. Plus, Russian made PE and PE blends have gained acceptance for Telecom cables produced on Maillefer equipment.
|
|
See
Extended Story..
|
June 13th, 2005
- Wire Russia
Mielkendorf, Germany - Preview of Uhing at Wire Russia 2005
|
| Uhing, the rolling ring drive inventor, presents its latest development: the RGK traversing system for 20 mm shafts. This Uhing product once again marks a milestone with regard to quality and price. Cutting-edge production technologies, high-quality material, perfect corrosion protection, continuous pitch setting and a release lever are standard features for the RGK.
|
|
See
Extended Story..
|
June 11th, 2005
- Wire Russia
Bethersden, U.K. - COLD PRESSURE WELDING IN ACTION AT WIRE RUSSIA 2005
|
Leading British manufacturer of cold pressure welding equipment, Pressure Welding Machines (PWM) Ltd, will be introducing its powerful EP500 rod welder and new HP100 air/hydraulic machine to the Russian market at Wire Russia 2005 (stand 7-4C06). Demonstrations of the cold welding technique, a fast and cost-effective method of permanently joining non-ferrous materials and their alloys without heat, fillers or fluxes, will be given on the stand, and visitors will be able to try the machines for themselves.
|
|
See
Extended Story..
|
June 10th, 2005
- Wire Russia
Fort Wayne, Indiana - X-RAY ORIENTATION AND SUPERIOR MOUNT GIVE FORT WAYNE WIRE DIE, INC. WIRE DRAWING DIES COMPETITIVE EDGE
|
| Fort Wayne Wire Die, Inc. will offer its full range of products and services to customers when exhibiting at Wire Russia 2005 in Moscow, Russia on June 21-24, 2005. The exhibit will highlight Fort Wayne Wire Die’s expertise in the single crystal and polycrystalline diamond wire drawing die market.
For over 65 years, Fort Wayne Wire Die has been providing the wire industry with consistent, reliable, quality single crystal natural diamond wire drawing dies. As a leader in the industry, Fort Wayne Wire Die uses x-ray orientation of the natural diamond stone during the mounting process to offer greater drawing consistency and additional productivity at each size throughout the life of the die. Fort Wayne Wire Die diamond dies will also recut more uniformly and consistently due to the controlled orientation of the diamond.
|
|
See
Extended Story..
|
June 9th, 2005
- Wire Russia
Reutlingen, Germany - WAFIOS Group Presenting at Wire Russia
|
| The WAFIOS Group will exhibit on the WIRE RUSSIA the following machines from their vast
range of more than 300 different machine types for the wire and tube processing industry:
CNC coiling and bending center BM 41 for wire diameters of 3 - 8 mm
This machine is able to produce the most diverse variety of bent wire parts. Programming is easy and tool costs are limited. This machine is ideal for small and medium-sized production batches.
As an example for their advanced tube bending technology, WAFIOS will present the CNC tube bending machine BMZ 41. This machine can bend outer tube diameters of up to 12 mm with up to then unknown production speeds. These kind of tubes are used in the automobile industry, especially for brake and fuel lines, as well as in the cooling and heating technology. Costs for BMZ tools are also very low when compared to tool costs of previously applied technologies.
|
|
See
Extended Story..
|
June 7th, 2005
- Wire Russia
Vienna/Austria - INVITATION to meet us at our Stand 7-3B 05
|
| Like in 2003, EDER Engineering-Austria will have a large Stand at Wire Russia 05, located in the Austrian Pavilion again. Being active in the former USSR since 1956, Russia and the C.I.S. always have been excellent markets for both EDER´s advanced drawing die-tools and particularly for leading die-tool working machines,
designed under nearly 60 years of specialization and as easy to understand and to operate conceptions.
|
|
See
Extended Story..
|
May 10th, 2005
- Wire Russia
Italy - Eurolls S.p.A. exhibiting at Wire Russia
|
| Eurolls S.p.A., founded in 1987 and based in Italy, has expanded its presence with huge success all over the world, mainly thanks to its great flexibility and availability in considering solutions that might even be completely different from all the standard and well-established ones.
A part from the renown cold rolling cassettes, for the production of round small diameter, in a more productive alternative to dies, or reinforcement wires, both of which are already widely used among the most famous producers in the world, Eurolls S.p.A., in close cooperation with its customers. has developed a series of “custom made” products for special profiles such as squares, twisted squares, flats, ornamental profiles, etc. using motorized and non-motorized cassettes.
|
|
See
Extended Story..
|
|
Maillefer Sa
Wire &
Plastic Machinery
Pan
Chemicals
Bongard Machines
view
the archive by month... |
|
|
