|
July 25th, 2010
- Wire China
Shanghai, P.R. China - Baosteel joins Tube China 2010
|
| The 4th All China International Tube & Pipe Industry Trade Fair (Tube China 2010), scheduled to be held at the Shanghai New International Expo Center, China from September 21 to 24, 2010, has caused a great sensation in the Asian tube & pipe world since the first edition in 2004 and has currently been one of Asia’s largest tube & pipe exhibitions.
|
|
|
July 13th, 2010
- Wire China
Mielkendorf, Germany - Uhing to Showcase Rolling Ring Drives at Wire China 2010
|
 Uhing, the inventor of the rolling ring principle that converts the constant rotary movement of a plain shaft into a traversing movement, will be a member of the collective German booth at Wire China 2010 in Shanghai. Uhing will not only showcase enhanced versions of the entry-level RGK rolling ring drives but also the modified RG15-2 and RG20-2 units. The range of tool-less Uhing-easylock® and U-Clip clamping elements will also be shown.
The RGK rolling ring drives feature housings of high tech material, are perfectly protected against corrosion and need not be converted when the rotating direction of the shaft changes. The RGK20-1 model for 20 mm shafts was equipped with a release lever fitted on the mounting surface, and its internal design was modified, which increased the thrust by approx. 20%.
|
|
See
Extended Story..
|
July 7th, 2010
- Wire China
Vienna, Austria - EDER Engineering GmbH in the forthcoming "Wire CHINA 2010“ in Shanghai
|
| EDER Engineering GmbH have for over 60 years offered efficient and technically leading standard-, semi-automatic- and fully automatic machines for both the reconditioning and production of ultrahard precision drawing die-tools made from tungsten carbide, natural diamond and synthetic PCD, as well as such precision die-tools and technical assistance for all advanced EDER equipment and for an up-to-date processing of die-tools.
EDER-Austria have been continuously active in China since 1978 and will again participate in the forthcoming exhibition in Shanghai ( 21 – 24 Sept., 2010)
|
|
|
June 29th, 2010
- Wire China
Chasse-sur-Rhône, France - Condat Lubricants to present at Wire China 2010
|
 At WIRE CHINA 2010, the CONDAT Asian sales team will invite
you to its booth to discover its extensive range of lubricants
designed for Wire Drawing and Cold Rolling.
- VICAFIL® : a complete range of wire drawing powders, wet lubricants, pastes, neat oils and greases
- STEELSKIN® : special High Tech wire drawing powders
New dry drawing powder VICAFIL SUMAC 3
This dry drawing powder is becoming the star of our new
generation of high performance sodium soaps and a reference
in the most advanced tire cord wire drawing workshops. Developed
in order to comply with the recent European regulation on chemical
substances (Borax), this drawing powder is replacing our famous VICAFIL SUMAC 2 in October 2010. Compared to the previous version, SUMAC 3 improves wire drawing of high carbon steel and stainless steel at very high speeds. Its lubricating film is even more resistant and provides a reduction in wire breaks and die wear. SUMAC 3 is available in powder or beaded versions to reduce soap consumption and dust.
|
|
See
Extended Story..
|
June 2nd, 2009
- Wire China
Shanghai, P.R. China - wire and Tube China 2010 will Stage Again in Next September
|
 The 4rd All China-International Wire & Cable Industry Trade Fair (wire China 2010) jointly organized by Shanghai Electric Cable Research Institute and Messe Düsseldorf China Ltd., and The 4rd All China-International Tube and Pipe Industry Trade Fair (Tube China 2010) jointly organized by Metallurgical Council of the China Council for the Promotion of International Trade and Messe Düsseldorf China Ltd., will grandly stage again from September 21 to 24, 2010 at Shanghai New International Expo Centre (SNIEC).
Reputed as the No.1 wire and tube event in Asia, wire and Tube China has been witnessed continuous growth of its exhibition area, exhibitors, booths and international portion for years. wire and Tube China 2008 attracted wide attention from the industry, occupying 5 exhibition halls with 1098 well-known companies from 30 countries and regions, featuring a gross exhibition area of 57,500 square meters, and attracting more than 30,000 trade visitors around the world.
|
|
See
Extended Story..
|
September 27th, 2008
- Wire China
Shanghai, P.R. China - Wire China - Perfect Platform, Excellent Growth
|
Asia’s largest wire and tube trade show, the 3rd All China-International Wire & Cable Industry Trade Fair (wire China 2008) and the 3rd All China-International Tube & Pipe Industry Trade Fair (Tube China 2008) was held from September 23rd to September 26th in the Shanghai New International Expo Center.
wire China 2008, organized by the Shanghai Electrical Cable Research Institute and Messe Dusseldorf China Ltd, and Tube China 2008, organized by the Metallurgical Council of the China Council for the Promotion of International Trade and Messe Dusseldorf China Ltd, are ranked first in Asia in the industry and have become the second largest in the world. It is deemed the best platform for industry players to develop businesses in China, and even Asia. The show featured 1,098 exhibitors occupying 57,500 square meters of exhibition space and attracted over 20,000 trade visitors from over 53 countries.
|
|
See
Extended Story..
|
July 18th, 2008
- Wire China
Eder Engineering GmbH Participating in Wire China - Stand W1 D44 - Vienna, Austria
|
 Eder Engineering GmbH for over 60 years offer efficient standard, semi-automatic and fully automatic machines for both the reconditioning and production of ultrahard precision tools made from tungsten carbide, natural diamond and synthetic PCD, as well as technical assistance for all Eder die-tool working equipment. EDER are active in China since 1980 continuously.
EDER-Austria will again participate in the forthcoming exhibition in Shanghai (23-26 Sept. 2008) and at their Stand W1 D44, located in the Austrian Pavilion.
|
|
See
Extended Story..
|
July 11th, 2008
- Wire China
Ecublens, Switzerland - Maillefer Extrusion's Wire China 2008 Preview
|
 Maillefer welcomes Wire China visitors to stand W1 G64 at Shanghai's SNIEC throughout September 23 to 26, 2008. The company's specialists look forward to present the many of this year's innovations for energy, telecom and fiber optics cable manufacturing.
In energy applications, for example, there's the state-of-the-art technology for the manufacturing of extra high voltage 500kV cable within optimal curing times and with exceptional cable roundness. Solutions like NCC, post heating, and EHT allow the CV lines to provide top performance and high quality product.
|
|
See
Extended Story..
|
June 27th, 2008
- Wire China
Mielkendorf , Germany - Joachim Uhing KG GmbH & Co. Exhibiting at Wire China 2008 - Booth W1G24
|
Uhing who started producing high-quality rolling ring drives 55 years ago, will showcase its tried and tested aluminium products but also the revised versions of the economically priced RGK series made of high tech plastic. The latter now feature a housing made of glass fibre reinforced high tech plastic, a higher thrust force, and a pressure adjustment screw.
|
|
See
Extended Story..
|
February 6th, 2007
- Wire China
Shanghai, P.R. China - Wire China 2007 - Post Show Report
|
The
All China - International Wire & Cable Industry Trade Fair
2006
Post Show Report
Wire & Tube China 2006 attracted altogether
923 exhibitors from 31 countries and regions, including:
- 615 exhibitors of Wire China and 308 exhibitors of Tube
China
- 370 exhibitors from overseas and 553 exhibitors from Mainland
China
Wire & Tube 2006 was held at hall E1-E4 of
SNIEC with a total exhibiting area of 40,000 sqm, net area 17,332
sqm.
|
|
See
Extended Story..
|
October 16th, 2006
- Wire China
Shanghai, China - FINAL REPORT - wire & Tube China 2006 successfully concluded in Shanghai
|
 wire
& Tube China 2006 ended on 28 September at the Shanghai
New International Expo Center to general acclaim as a very successful
event. Statistics show that the 2nd wire & Tube China boasted
a gross exhibition area of 40,000 square meters, an increase
of 14,000 square meters over the 2004 event. In total 923 well
known enterprises both from China and 31 foreign countries and
regions gathered in Shanghai once again.
|
|
See
Extended Story..
|
September 29th, 2006
- Wire China
Shanghai, China - Day 4 - Wire & Tube 2006
|
Day 4- Wire & Tube China 2006 - Shanghai, China
Day four was much slower as the booths started
emptying as people anxiously wanted to get on with buisiness,
their routine or home. While day 4 was slow, the unofficial
numbers were as follows: Monday - 10,600 / Tuesday - 9,100 /
Wed 6,000.
 Many
exhibitors were quite pleased with the show and the results
of showcasing in it. It was organized well, but very focused
on Chinese visitors, in spite of claiming to be an international
show. The addition of a Subway stop right at the Expo, better
carpets (my feet were in bad shape), and more focus on international
visitors, Wire & Tube 2008 will turn out to be a great success.
In fact, once again a bi-annual show has proven
helpful for many exhibitors who have established themselves
and are now continuing in talks for contracts because of an
initial interaction 2 years ago. If you did choose not to attend
or exhibit, perhaps you should consider 2008. Please stay tuned
for a post-show wrap up next week.
|
|
|
September 28th, 2006
- Wire China
Shanghai, China - Day 3 - Wire & Tube China 2006
|
Day 3 - Wire & Tube China 2006 - Shanghai, China
Day three in China proved to be a little slower
as we could see more and more of the red carpet. Although the
numbers were down, the quality of visitors was still very surprising
as we interacted with the visitors. The main story at this event
is  the
number of Chinese companies in the wire & cable industry.
Yes, there are over 300 Chinese companies exhibiting, but the
amount of entrepreneur visitors who are starting companies is
quite exciting.
This is the reason that there are many Euro
American
companies who are represented either by agent or by interpreter
here at the show. The Chinese economy is growing very fast,
and with that, if you do not get into the wire & cable action
now, you will miss out. While many Chinese companies have displayed
their lubricants, reels, take-ups, testing equipment, tapes
and dies - there are still areas of the industry that demand
the involvement of the long standing companies in the industry.
|
|
|
September 27th, 2006
- Wire China
Shanghai, China - Wire & Tube China - Day 2
|
Day 2 - Wire & Tube China 2006 - Shanghai, China
Day 2 at Wire & Tube China 2006 continued
with a high number of visitors, mainly from China, but also
from India, Malaysia, and scattered South Asian countries. Anticipation
on developing key accounts and new orders was high as visitor
cards were passed from booth to booth.
In recent years, rapid growth of the wire &
pipe industry in China has provided the stage for this exhibition.
In a "five-year plan," China is noted to be the largest
wire and cable producer in the world. China's wire & cable
industry aims to target the following:
- providing product and technologies
- cost effective products and technologies
- producing environmentally friendly and recycled goods
- manufacturing products of high class technology
As China seeks to continue it's dominance in
manufacturing, there is a great need for machinery, consumables
and experience in the wire & cable industry. Time will tell
if China can continue to grow and develop it's industrial capacity
and whether or not opportunities will arise for suppliers to gain
ground in establishing buisness with Chinese companies.
|
|
|
September 14th, 2006
- Wire China
Ecublens, Switzerland - Maillefer SA to exhibit in China in hall E2 stand D12
|
Wire & Tube China will take place from September 25 to
28, 2006 at the Shanghai New International Expo Centre. Maillefer
looks forward to welcome clients, partners, colleagues and friends
in hall E2 stand D12.
The
company will present its portfolio of manufacturing solutions
serving the energy, building, automotive, fiber optics, telecom
and networking applications. Show highlights include the latest
design for a high speed MV line, optimum curing for CV lines,
and high-speed datacom wire & cable manufacturing.
Company specialists will participate with several presentations
to be given at the seminar co-organized by SECRI. Topics include
High speed MV production, Continuous type change, Data transmission
cable (using demanding materials like FEP and PEEK) and Maillefer’s
fiber optic cable solutions.
Maillefer’s competent staff is attentive to customer’s
individual requirements. As an experienced supplier to the world’s
leading manufacturers, Maillefer is a reliable partner offering
the optimum equipment for today’s needs.
For further details use
this link or, please contact Manuel Felder, Maillefer
Sales & Marketing at:
Maillefer SA
Route du Bois 37
CH-1024 Ecublens
Switzerland
Phone +41 21 694 4111
Fax +41 21 691 2143
info@maillefer.net
|
|
|
September 13th, 2006
- Wire China
Valbrembo, BG, Italy - Vitari S.p.A. at Wire China - booth E2 C03
|
 The
Vitari company is located in Valbrembo near Bergamo in the Milan
vicinity and since 1925, is designing and manufacturing innovative
machinery for the wire industry.
Recognized leader in the industry and now part of the Eurolls
Group of companies it is able to benefit from the Group´s
hyper R & D activities which position Eurolls at the forefront
of the wire processing technology.
Vitari has over 80 years experience in the manufacture of
other wire processing machines like wire
straightening and cutting-off machines, nail, chain, gabion,
chain-link fencing, high-tensile barbed wire and dress hanger
machines. Our personnel will be available to entertain any interest
in these machines in our booth E2 C03.
VITARI S.p.A.
Via L.da Vinci 32
24030 Valbrembo (Bg) – Italia
Tel. +39.035.528.900 – Fax +39.035.528.999
e-mail: vitari@vitari.com
You can find out more about Vitari with
this link...
|
|
|
July 13th, 2006
- Wire China
Fort Wayne, IN - X-ray Orientation and Superior Mount Give Fort Wayne Wire Die, Inc. a Wire Drawing Dies Cometitive Edge
|
 Fort Wayne, Indiana – Fort Wayne Wire Die, Inc. will
offer its full range of products and services to customers
when exhibiting at Wire China 2006 in Shanghai, China on September
25-28, 2006. The exhibit will highlight Fort Wayne Wire Die’s
expertise in the single crystal and polycrystalline diamond
wire drawing die market.
For over 65 years, Fort Wayne Wire Die has been providing
the wire industry with consistent, reliable, quality single
crystal natural diamond wire drawing dies. As a leader in the
industry, Fort Wayne Wire Die uses x-ray orientation of the
natural diamond stone during the mounting process to offer
greater drawing consistency and additional productivity at
each size throughout the life of the die. Fort Wayne Wire Die
diamond dies will also recut more uniformly and consistently
due to the controlled orientation of the diamond.
|
|
See
Extended Story..
|
July 1st, 2006
- Wire China
Arnhem, The Netherlands - Teijin Twaron present at booth E2-CO6 - Wire China 2006
|
| Teijin Twaron will promote its para-aramid fibers Twaron® and Technora® for protection of optical fibers in optical fiber cables (OFC). Twaron para-aramid fiber is used worldwide for reinforcement of all kinds of cables to protect the optical fiber against mechanical forces, chemical attacks and even water, in case you use the water blocking version. The Technora para-aramid fiber is known for its high strength and differing color in the ripcord market which facilitates easy stripping of the outer jacket of an OFC in order to gain access to the inside of the cable.
|
|
|
|
Wire &
Plastic Machinery
Pan
Chemicals
Bongard Machines
view
the archive by month... |
|
|
