|
|
April 27th, 2009
- Interwire
Järfälla, Sweden - ACM at Interwire, stand 3026, displaying KSM, the tool to reduce the material cost
|
 It is imperative to control manufacturing costs in today’s
competitive wire and cable market. Proper and accurate
measurements and sampling of insulated wires and cables is
required by UL standards, and there are numerous methods for
accomplishing this. While manual off-line insulation sample
measurements are common practice, it must be understood
that these measurements are time consuming and inaccurate
by 5% to 7%.
 Today’s technology allows us to measure insulation samples
within one to three seconds, with an accuracy of 0.2%. ACM
AB of Sweden, which is represented in North America by
HOWAR Equipment, manufactures KSM offl ine insulation
measurement equipment that has been adopted by many of
today’s leading wire and cable manufacturers.
Over the past years, many collaborative studies with European
and American factories have provided great insight into
how effective these units are at helping manufacturers save up
to 5% of their raw insulation materials by reducing their wall
thicknesses through careful and accurate measurements and
corrective actions.
|
|
See
Extended Story..
|
April 25th, 2009
- Interwire
Mount Kisco, NY - Zumbach Presents Precision Dimensional Measurement with Modular Laser
|
 Zumbach Electronics offers a complete line of modular, single axis ODAC® laser gauges. They are
available either mounted on a rail or as components, i.e. with separate sender and receiver units for
flexible installation facilitating custom configurations. Depending on the application, multiple
sender/receiver pairs can be arranged in any position, offering a multi-axis measurement for large
configurable product clearance through the use of high precision, telecentric optics.
The gauges are based on the latest laser scanning technology from Zumbach's experience in this field.
With the unlimited installation and configuration possibilities, these gauges can be used in all
manufacturing processes.
|
|
See
Extended Story..
|
April 24th, 2009
- Interwire
Tinton Falls, NJ, U.S.A. - Fine International Corporation Exhibiting at Booth #2400 - Interwire 2009
|
 At Interwire in Cleveland, OH (I-X Center) on April 27-30, Fine International Corporation (Booth 2400) will have a large display of operational and static machinery.
The main system on display will be an operational respool line which will consist of an 800mm pintle style powered payoff feeding into a 320 meter (1000 feet) horizontal dancer accumulator. A 630mm belt puller will then feed product into a 630mm dual traversing reel shaft takeup. Other operational lines include an automatic braider bobbin winding line and a 16 carrier fine wire braider.
|
|
See
Extended Story..
|
July 25th, 2007
- Interwire
Conover, NC - Review - Rosendahl & Nextrom Participated at the Interwire, Cleveland Ohio 6th –10th of May 2007
|
 The
attendance and customer visits at our booth were good, with
a great variation of nationalities, from all around the globe,
including India & Korea. Several areas of interest were
acknowledged, particularly in the field of Hi-temp LAN applications
and within SZ- stranding and extrusion technology. Our fiber
Optic activities together with special components and indoor
applications were most prominent.
Together, the NEXTROM & ROSENDAHL team
offer first class products and turn key solutions in the field
of Extrusion, SZ Stranding, Fiber Optic, Forming, Welding
& Corrugation, combining leading-edge know-how
and state-of-the-art technology in close cooperation
with its customers and product suppliers.
The NEXTROM & ROSENDAHL team would like
to thank all business colleagues for visiting us during the
week and are looking forward serving your in the future.
You can find out more about NEXTROM & ROSENDAHL
with
this link.
|
|
|
May 16th, 2007
- Interwire
GUILFORD, Connecticut, USA - WAI's Interwire 2007 trade event featured new venue, new format, and a 14% increase in attendance
|
 The
Wire Association International (WAI), Inc. reports a successful
turnout at Interwire 2007, the Association's flagship trade
event, which was hosted for the first time at the International
Exposition Center in Cleveland, Ohio, USA, May 5-10, 2007.
 The
International Fastener Exposition (IFE), organized by The International
Fastener Machinery & Suppliers Association (IFMSA), was
co-located with Interwire. The combined assembly gave participants
access to 550 exhibiting companies, covering a massive 150,000
sq. ft. of space in the hall. The floor plan included pavilions
for rod and wire producers, fastener producers, manufacturers
of wire and cable, and suppliers to the industry.
|
|
See
Extended Story..
|
May 10th, 2007
- Interwire
Cleveland, OH, U.S.A. - Interwire, the largest wire and cable marketplace in the Americas, opens at Cleveland's I-X Center
|
 The
Wire Association International (WAI), Inc. hosts its week-long
Interwire trade event at the International Exposition Center
(I-X Center), Cleveland, Ohio, USA, May 5-10, 2007. The move
marks the first time that Interwire was held  outside
of Atlanta, Georgia, USA where the biennial event was first
introduced in 1981 and had been hosted until 2005.
The International Fastener Exposition (IFE), organized by The
International Fastener Machinery & Suppliers Association
(IFMSA), is co-located with Interwire giving participants access
to both exhibits.
Historically, participants – both visitors and exhibitors
– come from 50 countries around the world to visit Interwire,
which is ranked among Tradeshow Week’s top 200
largest tradeshows in the U.S.
|
|
See
Extended Story..
|
May 8th, 2007
- Interwire
Cleveland - The largest and longest-running wire and cable marketplace in the Americas opens
|
 Interwire 2007 opened yesterday with a record number of exhibitors from more than 50 countries. This years event includes more than 500 exhibiting companies that supply or manufacture wire, cable and fastener, formed and fabricated wire products. WAI's Annual Convention runs in conjunction with Interwire.
|
|
|
May 5th, 2007
- Interwire
Fort Wayne, IN, U.S.A. - BONGARD DRUMMOND TRADING your partner for second-hand machinery world-wide
|
 Bongard
Drummond Trading LLC (BDT) buys, sells and rebuilds used wire
making machinery for the ferrous, nonferrous, and cable industries.
BDT will display used and rebuilt equipment for inspection and
sale. It also offers a number of other services, such as machinery
rebuilding and reconditioning, machinery purchasing for clients,
machinery moving and consulting on nonferrous and cable processes
and production.
Being known as one of the leading suppliers for second-hand
equipment for the wire-, cable and rolling mill industry BONGARD
TRADING GMBH & CO. KG, Germany, has been in the market for
more than 48 years. Having more than 1200 second-hand machines
on stock to cover all different applications for the above production
e.g. steel wire, flat wire, power cable, data cable and communication
cable. BONGARD is also offering equipment directly from previous
owner’s factory sites. The equipment can be purchased
in "as is where is condition" or "function tested"
or "mechanically and electrically refurbished and modernized"
from the highly qualified Bongard team.
This is BONGARD:
Quality and solutions – qualified expert knowledge –
technical perfection – intensive dialogue with BONGARD
customers – more than 20.000 m² warehouses –
location in the USA
Delivery of complete manufacturing plants: BONGARD organizes
the complete handling of dismantling, transport, shipment, customs
and commissioning.
BONGARD is constantly looking for good surplus machinery and
plants.
Take the chance to learn more about our company and our products
during a talk with our specialized team. We are looking forward
to welcome you at the Interwire in Cleveland, Ohio, USA, booth
1826. You can find out more about Bongard with
this link.
|
|
|
May 3rd, 2007
- Interwire
Concord, Ont, Canada - HOWAR Equipment Inc. (Booth 2823) at Interwire 2007
|
HOWAR Equipment Inc. (Booth 2823)
HOWAR Equipment will showcase wire and cable manufacturing
accessories manufactured by its European represented manufacturers.
Displayed products will:
-
 GMP
SLOVAKIA: Steel Reels, Spools, Machined Reels, Take-Apart
Reels, Carriers and Reel Handling Equipment
-
METAVAN: Pressed Steel
Process & Shipping Reels
-
OM FRIGERIO: Mechanical
Wire Descalers , Rotating Dies, and Scrap Wire Coilers
-
PLASMAIT: Plasma Wire
Treatment Equipment
-
HOWAR Equipment: Pay-Offs
& Tension Control Equipment
-
ACM: Automatic Cable Cross-Section
Measurement (Bring Samples to Test Your Cables)
HOWAR has over 25 years industry experience,
and is interested in discussing any machinery and application
inquiries in order to provide solutions to practical requirements.
Personnel: Willy Hauer, Chris Hauer
Phone: (905) 738-4010 Fax: (905) 738-2474 E-Mail: sales@HowarEquipment.com
or visit www.HowarEquipment.com
|
|
|
April 19th, 2007
- Interwire
Addison, IL - AIM, Inc presenting at Interwire 2007
|
 AIM,
Inc. will be showcasing its’ most popular series,
as well as some new products at Interwire 2007 at booth 3800.
Promoting automation for today’s competitive marketplace,
AIM will demonstrate how their products can streamline the automation
process and save you time and money.
AFM-xDHx
The DH in the model number stands for “Double Head”
which means that the machine has two individual bending heads.
Each bending head positions along a straight wire and bends
it according to pre-programmed data. AIM’s line of equipment
is designed with lean manufacturing in mind based on reduction
of time consuming setups.
AFM-3D8-TU
This machine has become the benchmark to the industry, due to
its’ speed, reliability, price, versatility and modularity.
The AccuForm modular line of 3D programmable CNC steel wire
benders make virtually any kind of simple or complex parts from
round and flat wire
AFE2D6 w/welder
AIM’s Accuform “E” series is the economical
choice for the CNC steel wire bender industry. It offers functionality,
ease of use, and a great value unmatched in the industry. The
“E” series offers the choice of selecting options
needed without sacrificing quality.
3D Table Top Bender/AFT
AIM’s low cost modular CNC machine is a 2D table with
options to accessorize with automatic hopper feeds, 3-Dimensional
Head attachment, straight & cut unit, and secondary options
to complete offline secondary or small production runs.
In all instances, wire can be fed directly from a coil, straightened,
bent and cut using a software package that provides flexibility
and simplicity in programming and is offered in all “universal
languages." You can find out more about Aim Inc. with
this link.
|
|
|
April 18th, 2007
- Interwire
Agrate Brianza (MI) ITALY - PS COSTRUZIONI MECCANICHE : VISIT US AT THE INTERWIRE 20007 (BOOTH No. 3013)
|
 PS
COSTRUZIONI MECCANICHE is a world-wide well known company which
has been manufacturing cable packaging and rewinding lines,
pay off stands, take ups and such units as accumulators, dancers.
thermoshrinking tunnels, labelling machines, strapping machines,
pallet units etc. since 1960. Meticulous analysis of the final
cable packing process brought to the realisation of the present
automatic packaging lines ( on coils or spools for telephonic
or power , solid or flexible, round or flat cables) . PS lines
can also work both as slave to the extruder and as independent
units. Their modular structure allows the insertion of just
the necessary stations for the needed packaging type.
Our machines have been sold all around the world. Many of our
customers have purchased more than one line, which means they
are satisfied with our machines’ performance and would
keep on their business relations with us. PS offers, in fact,
a wide range of highly versatile products capable of meeting
all requests from the customers thanks to our in-house design
and production departments.
PS machinery can be divided into two main groups :
- Coil winding lines
- Spool winding lines
Both these groups include :
- Fully Automatic lines (for high production)
- Semi- Automatic lines (for low production and/or various changes
of wire type)
At our stand no. 3013, our staff will be pleased to show you
catalogues and videos concerning PS wide range of products.
|
|
|
April 17th, 2007
- Interwire
Ecublens, Switzerland - Mailleffer at this year’s Interwire show in Cleveland, USA
|
 Visitors
at this year’s Interwire show in Cleveland, USA will find
Maillefer at stand 2200 from May 7 to 10, 2007. The company
will be presenting its portfolio of wire & cable manufacturing
solutions for energy, fiber optic cable and telecom industries.
In energy applications, one will discover the latest designs
from building, automotive to high speed MV cable manufacturing
and optimum curing for CV lines. From the fiber optic team,
visitors will be presented with the OEL lines used in every
step of loose tube fiber optic cable production. The OEL 40,
41, 70 and 60 lines represent, respectively, solutions for tight
buffering, secondary coating, SZ stranding and jacketing. Finally,
for telecom, the subject will focus on recent configurations
for multi-layer striped LAN constructions as well as solutions
for micro-coax cable.
|
|
|
April 16th, 2007
- Interwire
Tinton Falls, NJ - Fine International Corporation at Interwire - Booth 2400
|
Fine
International Corporation of Tinton Falls, NJ, USA will be exhibiting
at the Interwire show in Cleveland on May 7-10. Booth number
2400 is 30 feet by 60 feet and will be filled with operating
machinery such as the 25mm-65mm-25mm Skin-Foam-Skin Gas Injection
Extrusion Line and a 16 carrier braider with 150 RPM operational
speed as well as an 1800mm Telescoping Arm Traversing Reel Takeup.
|
|
See
Extended Story..
|
April 14th, 2007
- Interwire
Rockford, Illinois - Schlatter Inc. - Interwire 2007 Preview
|
 Schlatter
Inc. is the U.S. unit of Swiss-based Schlatter, a leading manufacturer
for individual solutions in the field of resistance welding.
It offers complete welding plants for the production of industrial,
reinforcing and woven wire mesh as well as auxiliary equipment.
The exhibit will feature how new Schlatter technologies can
maximize customers’ ROI by optimizing changeover times,
assuring reliability and simplifying the production process.
Schlatter displays a vast range of equipment, including mesh
welders from both off-coil and pre-cut solutions, butt welders,
wire straightening and cutting machines. Exhibiting at Interwire
2007 in Booth 2423 sstaffed by an international team of sales
and service engineers.You can find out more aboutSchlatter Inc.
with
this link.
|
|
See
Extended Story..
|
April 12th, 2007
- Interwire
Lebanon Borough, NJ - Come and see Cortinovis at Interwire booth #2032
|
Cortinovis Machinery S.p.A./Cortinovis America, LLC
Tel. 908-236-0400 - Fax: 908-236-0403
E-mail: cortinovis@cortinovisamerica.com
Web: www.cortinovisamerica.com
Italy/USA Booth 2032
Exhibiting: Cortinovis Machinery, newly acquired and a part of
the Eurolls Group will have expert personnel to discuss the complete
range of Cortinovis innovative machines for the wire, rope, power
and telecommunication industry as well as the traditional machines.
These include: the patented  MONOBITORSION
for laying up insulated cables and strands up to 37 wires; the
CONOTORSION, which is suitable for laying up insulated conductors
and/or for armoring up to 48 wires; the back twist free Tubular
Strander for manufacturing sensitive multi-layer cables without
twisting the core; Rigid Stranders for making strand and screening/
armoring (individual and tandem); and double-twist bunchers/stranders
from 630-2000 mm for bare conductor and insulated cables.
Personnel: Anthony DeRosa, Raul Pascoareli
|
|
|
April 11th, 2007
- Interwire
Greensboro, NC, U.S.A. - INTERWIRE 2007 - Entrust your Wire and Cable projects to Gauder Group !
|
Interwire, Booth 3209
 Gauder
Group ensures advanced, cost-effective and complete solutions
delivering new and resale equipment to the wire, cable and fiber
optic industries as well as providing a comprehensive range
of services (training, spare parts, bow design) and machine
innovations for 30 years now. Since 1992, the American subsidiary
“Gauder Group, Inc.” successfully covers the US
and Canadian markets for all group products.
SETIC and POURTIER of the Gauder Group are leaders in Rotating
Machines. They develop and market Innovative Technically Advanced
Equipment in manufacturing systems for Metallic Cables (energy,
low, medium and high voltage power cable - telecommunication
and multimedia - special purpose cables) and Fiber Optic Cables.
The Greensboro based facility has a large testing area to set-up
SETIC and POURTIER equipment for evaluation and trials with
customer’s own products.
|
|
See
Extended Story..
|
April 10th, 2007
- Interwire
Aston, PA, U.S.A. - Traverse with spool flange detection - Interwire 2007 - Amacoil booth 3709
|
SPOOL FLANGE SENSING OPTIONS FOR REFLECTIVE OR NON-REFLECTIVE
SPOOLS ENHANCE SPOOLING ACCURACY AND SAVE TIME
 Amacoil,
Inc., has introduced two styles of an optical flange sensing
system to enhance winding accuracy when used with Uhing traverse
winding drives. One system relies on the reflective properties
of the spool flanges, and the other version uses a "light
curtain" concept which does not require reflected light.
Both systems employ opto-sensors to detect the spool flanges
and signal a pneumatic or electronic switch to flip the spring-actuated
reversal lever on Uhing winding drive. Whereas the lever is
normally triggered by end stops manually positioned by an operator,
the flange sensing systems save time because the operator need
not stop work to adjust the end stops when spools of varying
widths are used. Additionally, spooling accuracy is enhanced
because optically detecting the flanges eliminates human error
in positioning the end stops.
|
|
See
Extended Story..
|
April 9th, 2007
- Interwire
Valbrembo, Italy - Vitari S.p.A. exhibits at Wire Russia
|
 The
Vitari company is located in Valbrembo near Bergamo in the Milan
vicinity and since 1925, is designing and manufacturing innovative
machinery for the wire industry. Recognized leader in the industry
and now part of the Eurolls Group of companies it is able to
offer an extreme flexibility as well as an aptitude for the
development of innovative solutions which are not only technological
but permit economies of scale for the final end user.
Large is the range of machines which we manufacture, starting
from the  automatic
wire straightening and cutting-off machines, till all machines
for manufacturing nails, chains, chain link fencing, barbed
wire, dress-hangers etc. and all ancillary machines for the
various indicated productions.
The business organization of Vitari S.p.A. is present in Italy
and in nearly all the Countries of the five continents through
exclusive agents. An efficient after-sale assistance assures
the intervention in the whole world of skilled engineers with
the maximum timeliness. The continuous application in the studying
for updating and the making of always more modern and efficient
machines is the guarantee that Vitari S.p.A. will always be
in a position to offer the best to the qualified customers.
|
|
|
April 9th, 2007
- Interwire
Bethersden, Kent, UK - PWM at Interwire 2007
|
 British
company PWM will exhibit its extensive range of high performance
cold welders, all of which use the proven multiple upset technique
to create a reliable permanent bond on non-ferrous materials
on round wire or rod sections. No heat, flux or fillers are
required, no dangerous fumes are emitted and the pneumatic,
air/hydraulic and electro/pneumatic models are economical and
energy efficient.
The range includes small hand held models with capacities from
0.10mm (.0039”) diameter, ideal for welding fine wire
in confined spaces, up to the powerful electro/pneumatic EP500
 rod
welder, which has a capacity of 5.00mm to 12.50mm (.197”
to .492” copper and 15.00mm (.590”) aluminium. The
manual M101, one of PWM’s best-selling machines in North
America, can be bench or trolley mounted and will weld copper
from 1.00mm to 3.60mm (.040” to .141”) and EC aluminium
from 1.00mm to 5.00mm (.040” to .197”).
The PWM range will be featured at the show by Huestis Industrial
(booth 1823), exclusive distributor of PWM cold welding equipment
and dies in North America.
|
|
|
April 7th, 2007
- Interwire
Bethersden, Kent, UK - PWM at Interwire 2007
|
British
company PWM will exhibit its extensive range of high performance
cold welders, all of which use the proven multiple upset technique
to create a reliable permanent bond on non-ferrous materials
on round wire or rod sections. No heat, flux or fillers are
required, no dangerous fumes are emitted and the pneumatic,
air/hydraulic and electro/pneumatic models are economical and
energy efficient.
The range includes small hand held models with capacities from
0.10mm (.0039”) diameter, ideal for welding fine wire
in confined spaces, up to the powerful electro/pneumatic EP500
rod
welder, which has a capacity of 5.00mm to 12.50mm (.197”
to .492” copper and 15.00mm (.590”) aluminium. The
manual M101, one of PWM’s best-selling machines in North
America, can be bench or trolley mounted and will weld copper
from 1.00mm to 3.60mm (.040” to .141”) and EC aluminium
from 1.00mm to 5.00mm (.040” to .197”).
The PWM range will be featured at the show by Huestis Industrial
(booth 1823), exclusive distributor of PWM cold welding equipment
and dies in North America.
|
|
|
April 5th, 2007
- Interwire
Rogno, BG, Italy - Pan Chemicals presents at Interwire Cleveland: booth 2904 - Italian Pavilion
|
 Pan
Chemicals is an Italian producer of special drawing lubricants
and coatings for ferrous-non ferrous and stainless steel wire
and equipment for the wire industry.
The production program includes:
• DRY DRAWING LUBRICANTS for: low carbon
steel wire, plating quality wire, welding wire, CHQ, high carbon
steel wire, drawing after galvanising and high alloyed steel.
• WET DRAWING LUBRICANTS: soluble lubricants,
neat oils and greases.
• PRODUCTS FOR SURFACE TREATMENT: phosphate
coatings, non reactive  precoatings,
precoatings for stainless steel. • AUXILIARY PRODUCTS for: degreasing,
surface treatment, pickling of stainless steel, special applications.
• Orbital abrasive sanding machine.
• Mechanical descalers.
• Deblaster TR 1 (single wheel shot
blaster).
• Rotating pressure die boxes.
• Borax - coating and drying equipment.
• High-tech die reconditioning equipment.
|
|
|
April 3rd, 2007
- Interwire
Mount Holly, NC - American & Efird Global Supplier of Custom Designed Solutions for the Wire & Cable Industry
|
 American
& Efird is a global supplier of custom- designed solutions
for the wire & cable industry. A & E offers a comprehensive
product line of strength members, ripcords, binder & marker
yarns, as well as textile products designed for the field installation
& servicing of telecommunication cables. Specialties include
para & meta-aramids, PET, PA, Polypropylene, Rayon & Cotton
yarns, as well as PBO, PBI and other advanced fiber systems. A&E
seeks to utilize its manufacturing expertise and global presence
to continually align itself with its customers' needs & requirements.
Areas of Expertise: 
Cable Yarns Twines, Tapes Armoring Strips Marking Ink (Yarns
& Twines, Tapes, Cable & Wire Tags Inks & Markers)
Plastic Compounds Color Pigments (Compounds, Compounds)
Please join American & Efird, Inc. at the upcoming Interwire
show located at booth # 2608
You can find out more about American & Efird, Inc. with
this link.
|
|
|
March 31st, 2007
- Interwire
Oxford, MD - WITELS Apparate-Maschinen ALBERT GmbH presents at Interwire 2007
|
 WITELS-ALBERT
will be presenting both new and field-proven solutions from
its range of STRAIGHTENER, ROLL, GUIDE, FEED AND PRE-FORMER
products. Using “STRAIGHTENING POWER@YOUR COMMAND”
as its motto, the company will turn the spotlight onto engineering
solutions for straightening applications, which give users what
they have been asking for, namely automatic straightening of
process materials using defined settings.
The machines and systems in the new EASY product range feature
simple construction, low component count and a user-friendly
human-machine interface, and this all adds up to an unparalleled
price/performance ratio for the customer. Visitors to the stand
can see the new products in action and find out how good they
really are. The show also gives visitors the opportunity to
learn more about the latest clever ideas from the world of wire,
tube, rope and cable production and to familiarize themselves
with what the new WITELS-ALBERT website has to offer.
|
|
|
February 8th, 2007
- Interwire
Conover, NC , U.S.A. - INTERWIRE 2007 - Preview Nextrom & Rosendahl
|
NEXTROM & ROSENDAHL are pleased to welcome customers and industry
colleagues to its booth,
no 2418 at the INTERWIRE 2007, Cleveland, Ohio, USA 7-10 May.
NEXTROM, the premier supplier of solutions for
the fiber and cable market, will be on hand to present its latest
developments in fiber and cable manufacturing with special focus
on deposition and sintering for VAD & OVD preforms, MCVD &
draw towers for specialty fibers, high-speed draw towers, ribbon
and coloring lines.
ROSENDAHL, the world technology leader in RF
and Coaxial products, will be present to discuss its latest developments
in welding and corrugation processes for both CU and AL products.
Their customers will also be provided with the recent advancements
in Fluoro Datacom, Dry tube technology for Fiber Optical cables,
Automotive & Low Voltage applications.
|
|
See
Extended Story..
|
February 2nd, 2007
- Interwire
Ecublens, Switzerland - Maillefer - Interwire 2007 preview
|
Visitors
at this year’s Interwire show in Cleveland, USA will find
Maillefer at stand 2200 from May 7 to 10, 2007. The company will
be presenting its portfolio of wire & cable manufacturing
solutions for energy, fiber optic cable and telecom industries.
|
|
See
Extended Story..
|
February 1st, 2007
- Interwire
Guilford, Connecticut, USA - “Overcoming Manufacturing Challenges” is title of keynote address at Interwire 2007 - May 5-10, 2007 — Cleveland, Ohio, USA
|
The
Wire Association International (WAI), Inc. reports details of
its 77th Annual Convention at the I-X Center, Cleveland, Ohio,
USA, May 5-10, 2007, including a keynote presentation by Patrick
Cleary, Senior Vice President of Communications, at the National
Association of Manufacturers (NAM), entitled: “Overcoming
Manufacturing Challenges.”
This address, which will be presented during
WAI’s Awards Breakfast on May 7, 2007, will
offer a timely examination of the competitive strategies—including
removing costs from the system—used by U.S. manufacturers
that face the unyielding competition of a global economy.
“Manufacturing efficiencies and solutions
remain among the top priorities of Interwire visitors,”
said Steven J. Fetteroll, WAI’s Executive Director. “We
are delighted that Mr. Cleary will share his insight and perspective
during Interwire.”
|
|
See
Extended Story..
|
November 7th, 2006
- Interwire
GUILFORD, Connecticut, USA - AWPA to participate as supporting sponsor of WAI's Interwire 2007
|
The Wire Association
International (WAI), Inc. reports the renewed support of Interwire
by the American Wire Producers Association (AWPA) whose board
of directors recently voted in favor of its supporting sponsor
status for the 2007 event, which will be held at the I-X Center,
Cleveland, Ohio, USA, May 5-10, 2007.
AWPA's Executive Director Kimberly Korbel noted
"AWPA's member companies employ WAI members in the ferrous
rod and wire sectors and many of them have had important leadership
roles in WAI. We are pleased to support Interwire and value the
strong relationship between these two industry organizations."
|
|
See
Extended Story..
|
May 18th, 2005
- Interwire
Atlanta, Georgia - Teknor Apex introduces broad range of non-lead stabilized vinyl.
|
| Teknor Apex has taken a leading role in enabling wire & cable producers to make products that are RoHS- compliant. At Interwire Teknor Apex introduced a broad range of non-lead stabilized (NSL) vinyl compounds that are needed to meet the European Unions new RoHS legislation. The products cover a wide spectrum of temperature ratings and hardnesses and include extrusion and molding grades.
There are formulations for clarity, sunlight resistance, oil resistance and specific flammability requirements.
|
|
|
May 17th, 2005
- Interwire
Atlanta, Georgia - A record number of exhibits at this years Interwire
|
| What strikes visitors to this years show is the number of new companies that have been born out of the demise of some major suppliers that are no more. Another observation is the conspicuous absence or low key presence by some once major equipment suppliers. Other companies that have fully understood that with globalization you need to have a global presence.
|
|
|
May 17th, 2005
- Interwire
Atlanta, Georgia - GE Introduces new resin at Interwire
|
| General Electric Advanced materials choose this year's Interwire to launch it's new FLEXIBLE NORYL RESIN - formulated to meet a number of environmental legislations for wire coating materials that are in the pipeline.
|
|
|
April 25th, 2005
- Interwire
East New Market, MD - Witels Albert Exibiting in Interwire at booth # 2031
|
| WITELS-ALBERT will be exhibiting new and time-tested goods from its STRAIGHTENING,
ROLLING, GUIDING, TRANSPORTING and FORMING product groups at booth 2031. Each product group is
visually highlighted in the booth in a different way. Selected new products will be exhibited in action
to enable visitors to see their performance for themselves. The main thought behind the company’s
research and development work over the last two years has been to supply quality products which set
the trends in the wire, strip, cable and tube industry and effectively and reliably help to configure work
procedures in the various user groups. The main focus of the products is to minimize the amount of
time, material and work required for their use and adjustment while ensuring maximum processing speeds and forces. View a more extended display of the products to be displayed at Interwire.
|
|
See
Extended Story..
|
April 23rd, 2005
- Interwire
Switzerland - Maillefer Interwire 2005
|
| Springtime visitors to May’s Interwire in Atlanta, USA, will find Maillefer at stand 2720. With the accent being placed on LAN cable manufacturing, the company counts on renewed interest from the North American telecom industry. On the stand, the EKP fully automatic dual take-up will be the most visible. The robust and reliable component is familiar to the industry worldwide. The model displayed is an EKP 5 version optimized for LAN manufacturing and includes Allen-Bradley controls, drives and motors. In the extrusion field, new model crossheads ECH for multi-layer Telecom wire boast exacting design, productivity and operator friendliness. An ECH 4/6 SL for solid insulation will be on display.
|
|
See
Extended Story..
|
April 21st, 2005
- Interwire
London, U.K. - CRU Releases Worldwide Copper Rod StudyAt Interwire 2005
|
| CRU, the world's leading independent business analysis and consultancy firm in the wire and cable arena, will be releasing its Copper Wirerod Industry Survey 2004 at Interwire 2005. The survey, a must read for wire and cable executives, summarizes the worldwide supply and demand situation for copper wirerod to 2004 and forecasts usage and capacity trends to 2008. This study is based upon CRU's more than thirty years of expertise in the analysis and forecasting of trends in copper and copper-related products. CRU also will be providing information on other recently released wire and cable executive must reads such as The World-wide Datacom Market Report and The World Market For Power Cables...
|
|
See
Extended Story..
|
April 21st, 2005
- Interwire
Valbremo, Italy - Vitari to exhibit automatic wire straightening and cutting-off machine
|
| This year too we will be on display with our products at the exhibition in object mentioned.
We will exhibit our automatic wire straightening and cutting-off machine:
Mod. NR.220 – for wires from ø 3,0 a 7,0 mm.
variable speed from 30 a 120 m/minute
collecting bench of 3 m. length
Mod. PM.1000 – motorized pay-off for coils up to 1 Ton.
You could see this machine on work in
BOOTH # 1730
together with some other machines of the company AIM INC which is our distributor in USA and Canada.
Mr. Mario Vitari and Mr. Alberto Vitari will be available for all technical and commercial information you might need.
We await your pleasant visit to our booth and in the meantime we remain, VITARI S.p.A. Use this link to find out more about Vitari.
|
|
|
|
Maillefer Sa
Wire &
Plastic Machinery
Pan
Chemicals
Bongard Machines
view
the archive by month... |
|
|
