|
GENCA Products:
The illustration above is a generic
representation of the many products available from
GENCA
.
All of these products are
available in designs and materials suitable to extrude any plastic,
rubber, high temperature plastics and filled plastics.
Over 60+ years, GENCA has led the field in
innovations and has developed thousands of extrusion tools and
systems. GENCA routinely undertakes development of new
extrusion tools.
The following list shows ranges and type of products
available. Additional details for the most popular products are shown in
individual product line brochures; i.e.,
“Medical”, “Wire &
Cable”, “Hose, Pipe &
Consumer”, “Screws &
Barrels”, “Purge Valve"
and "Quick Color Changers”
. These brochures
contain information for only the most popular models. Our Sales Engineers can help you find
the right solution.
1.
Crossheads
GENCA supplies crossheads for “sub-millimeter” to
over 20 inches for extruded products in a variety of materials and
designs.
2.
In-Line Heads
GENCA supplies in-line
heads for 1/2” to over 10 inches for extruded products in a variety of
materials and designs.
3.
Purge Valves
GENCA supplies manual
and pneumatically operated purge valves. GENCA purge valves feature adjustable
pressure/flow characteristics. This "simulates" the crosshead at
running conditions.
4.
Flange Connections & Clamps
GENCA supplies flanges
and clamps for most extruders and GENCA extrusion
heads.
5.
Quick Color Change Systems
GENCA supplies Quick
Color Change (QCC) Systems that are hydraulically, pneumatically or
manually operated. These are
available in “no purge/no waste” and “purge to floor”
configurations.
6.
Tips, Dies, Pins & Bushings and Spare Parts
GENCA designs and
manufactures extrusion tools for simple round products to complex
multi-lumen, multi-layer products.
GENCA stocks a large inventory of common tips, dies and
crosshead parts.
7.
Breaker Plates
GENCA supplies a wide
variety of breaker plate designs, including replacements for most
OEM’s.
8.
Extrusion and Injection Screws, Barrels & Check
Valves
GENCA can supply screws
from under 1/2” diameter up to 18” diameter and 30 feet long, and barrels
up to 12” diameter. For more
details, see section “Screws, Barrels and Check
Valves”.
9.
Swing Gates, Tables and Clamps
GENCA supplies a wide
variety of designs of swing gates and clamps. Tables are available for
GENCA’s larger (heavier) heads. These tables support heads during
positioning, cleaning, assembly and disassembly. Many of these have hydraulic
assist designs.
10. Heaters, Thermocouples,
Rupture Discs
GENCA stocks
a large number of heaters, thermocouples and rupture disks for its
most popular heads which allows for quick
delivery.
11. Copper Mesh
GENCA
stocks copper mesh which is used
for cleaning extrusion tools.
|
