Monodie MD111 from Element 6 offers the highest level of quality consistency in wire drawing die blanks. Each diamond blank is produced using a tightly controlled single crystal synthesis process and is then subject to high standards of quality control. End users of Monodie MD111 blanks benefit above all from the exceptional wear resistance offered by this product which results from the {111} diamond crystal orientation.
To locate a distributor in your area go to www.e6mono.com and select the Sales Office option on the home page. |
| |
Product nomenclature |
Nominal thickness (mm) |
Thickness tolerance (mm) |
Minimum
inscribed circle diameter (mm) |
| |
MD111/05 |
0.50 |
0.46 - 0.55 |
0.6 |
| |
MD111/06 |
0.60 |
0.56 - 0.65 |
0.7 |
| |
MD111/07 |
0.70 |
0.66 - 0.75 |
0.8 |
| |
MD111/08 |
0.80 |
0.76 - 0.85 |
0.9 |
| |
MD111/09 |
0.90 |
0.86 - 0.95 |
1 |
| |
MD111/10 |
1.00 |
0.96 - 1.05 |
1.1 |
| |
MD111/11 |
1.10 |
1.06 - 1.15 |
1.2 |
| |
MD111/12 |
1.20 |
1.16 - 1.25 |
1.3 |
| |
MD111/13 |
1.30 |
1.26 - 1.35 |
1.4 |
| |
MD111/14 |
1.40 |
1.36 - 1.45 |
1.45 |
| |
MD111/15 |
1.50 |
1.46 - 1.55 |
1.5 |
| |
MD111/16 |
1.60 |
1.56 - 1.65 |
1.6 |
| |
MD111/17 |
1.70 |
1.66 - 1.75 |
1.7 |
| |
MD111/18 |
1.80 |
1.76 - 1.85 |
1.8 |
| |
MD111/19 |
1.90 |
1.86 - 1.95 |
1.9 |
| |
MD111/20 |
2.00 |
1.96 - 2.05 |
2 |
|
Areas of Expertise:
Drawing Dies, Extruder Screws Crossheads & Other Wear Parts
(Drawing Dies, Die Shop Equipment, Drawing Dies)
Process Wire & Rod
()
