Commission Brokers

	Braiders
	Bunchers
	Cablers
	Capstans
	Drawers
	Extruders
	Fiber Optic
	New Offerings
	Non-Ferrous
	Payoffs
	Reels, Spools
	Stranders - Rigid
	Stranders - Tubular
	Take-ups
	Twinners, Twisters
	Wire Assembly
	Miscellaneous

updated Dec 09

1 - DAVIS STANDARD	4.5" 24:1 L/D Extruder, Model 45IN45, 17.36:1 Gearbox Ratio, new 2/91, 225HP Cap, with Screw and Crosshead; EMERSON 150HP DC Motor, 500/300-150v, 1750rpm; PRO RATE Dual Color Auger Feeder, Model 5929-1 w/ DAVIS STANDARD Temp Panel w/11-Zone HONEYWELL Controllers; LASER MIKE 182 Diameter Controller, NO Scan Head; 2 - EUROTHERM SSD Drives
1 - DAVIS STANDARD	4.5" 24:1 L/D Extruder, Model 45IN45, 17.36:1 Gearbox Ratio, new 11/90, 225HP cap, with Screw, Hopper, NO Crosshead; EMERSON 150HPDC Motor, 500/300-150v, 1750rpm w/DAVIS STANDARD Temp Panel w/11-Zone HONEYWELL Controllers; 2 - EUROTHERM SSD Drives; CHALLENGER Transformer, 175kva **Temp Panel is incomplete, components missing
1 - STERLING / DAVIS STANDARD	4.5” 24:1 L/D Extruder, #66029, w/Screw, Crosshead, RELIANCE 150HP DC Motor, RELIANCE FlexPak 3000 DC VS Drive; PACFIC ENGINEERING* Hopper Loader; MAGUIRE Model WSB911 Weigh Blender, #94813-04, 2000; Master Temp Panel with 9-Zone HES 808 Controllers; TARGET Series 4000 Diameter Controller w/Scan Head
4 - DAVIS STANDARD	3.5” 24:1 L/D Extruders, Model 35IN35, Model 350SII, Screws, less Crossheads
1 - DAVIS STANDARD	3” 30:1 L/D Blue Ribbon, 40HP DC Motor, Temp Panel
1 - DAVIS STANDARD	3” 24:1 L/D, Screw, Motor, Temp Panel
1 - DAVIS STANDARD	3" 24:1 L/D Model MV30IN25H, S.O. #63510, CONAIR Hopper and Hopper Loader, MARATHON 40HP Motor, A/B 1336 Drive; Temp Panel w/8-Zone EUROTHERM 2208 Controllers
1 - DAVIS STANDARD	2.5” 24:1 L/D Nylon Extruder, Model 250SII, 17.26:1 Gearbox Ratio, 1981, Screw, NO Crosshead; RELIANCE 40HP DC Motor; Temp Panel with 8-Zone BARBER-COLEMAN 7EM Controllers
1 - DAVIS STANDARD	2.5” 24:1 L/D Vertical Extruder, Model 250V, Screw, #K1357, S.O. #99628-C, 11/86, RELIANCE 40HP DC Motor
1 - DAVIS STANDARD	2.5” 24:1 L/D Vertical Extruder, Model 250V, NO Screw, #H5415, S.O. #94484-C, 12/80, RELIANCE 40HP DC Motor
1 - MERRITT DAVIS	2.5” 24:1 L/D Extruder, Screw, NO Crosshead, 14.1:1 Gearbox Ratio, RELIANCE 50HP DC Motor; WILSON Model 106 Color Meter; Temp Panel w/6-Zone EUROTHERM and 1-Zone LOVE Controllers, TARGET Series 4000 Controller, Model PS4110; RELIANCE GV3000/SE Sensorless Enhanced AC Drive; RELIANCE FlexPak Plus V*S Drive
1 - DAVIS STANDARD	2.5” 24:1 L/D Hi-Temp Extrusion Line, with: HALL 48” Moveable Arm Drag Payoff, 1988 DAVIS STANDARD 36” Horizontal Metering Belt Wrap Capstan GLENRO Preheater DAVIS STANDARD 2.5” 24:1 L/D Hi-Temp, Model 25IN25, S.O. #01629, #K7317, 11/88, 17:29:1 Gearbox Ratio; RELIANCE 50HP DC Motor, 2 - Crossheads, 2 - Screws, Heated Clamp, Swing Gate; STERLCO Unit Master Operator Control Panel w/8-Zone EUROTHERM Controllers; TECHMET 182 Diameter Controller; Extruder and Capstan Drives CONAIR Dryer, Model CD200 w/Hopper and Loader DAVIS STANDARD 36” Horizontal Pullout Belt Wrap Capstan HALL 48” Moveable Arm Take-up w/Model 4F23 Dancer, 1988
1 - DAVIS STANDARD	2.5” 24:1 Primary Line, to include: TEC 30” Powered Shaftless Payoff, #671, MARATHON 10HP, w/Dancer, Model 40’ Dancer Accumulator, #671 SAMP Wire Drawer/Annealer, Model TR/2-TP-R, #1A902601, 1999, SICME Motor; Drive Cabinet, Model TR/2-TP, #1B902602, 1999; Payoff Guide Stand LOSMA 50 Gallon Filtration Unit, Series DETEX, Model DTE 200, #0469, 1999 DAVIS STANDARD 2.5” 24:1 L/D Extruder, Model 25IN25, #V7681, S.O. #61096, 17.28:1 gearbox ratio, new 3/98; Screw, Crosshead, GE 40HP DC Motor DAVIS STANDARD Temperature Panel, B/M #V7692, Touch Screen, with ZUMBACH USYS 5000 FFT Process Monitoring System, 2001/2002; CLINTON Spark Tester Controller, Model HF20GB DAVIS STANDARD Drive Cabinet, B/M #7691 DAVIS STANDARD 1” 30:1 L/D Hi-Temp Striping Co-Extruder, Model DS-10, #V7700, S.O. #61096, 16.5:1 gearbox ratio, new 3/98; Screw, Hopper; GE 3HP DC Motor DAVIS STANDARD Mist Capstan, Model MPC-12-HS, w/ZUMBACH Capac Monitor, Model CAPAC 300CMK-PA, #8286.0004 Cooling Trough, 5 – 10’ Sections, Stands CLIPPER Dancer, Model DCR-V7690-61096 CLIPPER 24” Parallel Axis Shaftless Dual Reel Take-up, Model PS24HS-V7689-61096, twin 15HP EATON Dynamatic Motors, Ramps, etc. Plus: 4 – REX Transformers, 6, 7.5, 17, 51kva; Piping
1 - DAVIS STANDARD	2” 30:1 L/D Hi-Temp Extrusion Line, with: DAVIS ELECTRIC Model MPO-18 Powered Payoff w/Dancer ZUMBACH Model 600 Preheater, 12kva, 360 deg. F, rated 2000fpm, 9.75” sheaves DAVIS STANDARD 2” 30:1 L/D Hi-Temp, Model 20IN20, 1997, GE 40HP DC Motor and Drive, less Crosshead. The Extruder has a Xaloy X-800 Barrel and Hastalloy composite type Screw. The Flanges are Inconel. Master Operator Control Panel, Touch Screen; less Diameter Controller Drive Cabinets Stainless Steel Water Trough, approx. 25’ - 30’ 50 Gal. Stainless Heated Water Tank, 1997 DAVIS STANDARD Model MPC-12-HS Mist Capstan, 12” Sheaves, Motor, L-R DAVIS ELECTRIC Model TAP-30 Parallel Axis Dual Reel Take-up (22” Snaggers), Twin Motor w/POWERTEC 1000A Regen Drives; Dancer, 6” Sheaves
1 - STERLING	1.5” 24:1 L/D Extruder, #15361, 10HP Motor
1 - STERLING	1.5” 24:1 L/D Extruder, 10HP Motor, less: Crosshead, Screw, Panel
1 - ENTWISTLE	1.5” 24:1 L/D Extruder, Model EC1500-24, 10HP Motor, Screw, less Crosshead; Panel is missing Controllers
1 - KILLION	Model KL-100, Motor, Temp Panel w/4-Zone EUROTHERM 91e Controllers
1 - WAYNE	3/4” 24:1 L/D
1- NELMOR	3/4” Piggy Back Extruder, Motor
3 - DeANGELI	45mm 24:1 L/D Hi-Temp Lines
1- BRABENDER	3/4" 22:1 L/D Plasti-Corder, Type 2003, #736, Motor
1- BRABENDER	Plasti-Corder, Type PL2100, Motor
1 - ROYLE	6” CV/Crosslink Line, with: ROYLE 60” Belt Wrap Capstan, 7.5HP Motor; ROYLE 6” Extruder, 250HP Motor, SIEMENS Drive; 6” Splice Box and Steam Tubes; Custom Built Accumulator; ROYLE 72” Seal Box; ROYLE 60” Belt Wrap Capstan, 7.5HP Motor
1 - ROYLE	4.5” CV/Crosslink Line, with: ROYLE 60” Belt Wrap Capstan, 7.5HP Motor; ROYLE 4.5” Extruder, 125HP Motor; Custom Built Accumulator ; ROYLE 60” Belt Wrap Capstan, 7.5HP Motor; ROYLE 72” Seal Box; Vertical Accumulator, Custom Built; 60” Caterpuller Capstan
2 - ROYLE	4.5” 15:1 L/D Rubber Extruders
1 - ROYLE	2.5" 15:1 L/D Silicone Extruder, 1A Gearbox, Clamp, Screw, no Crosshead; Master Panel w/ TARGET Series 4000 Diameter Controller, no Scan Head
13 - Extruder Screws	2.5”, 3.5”, 4.5”

The List AboveEquipment is offered on an immediate basis. If you have an interest in this equipment, or any equipment not listed, please do not hesitate to contact us. Please note that all listed equipment is offered on an "As-Is, Where-Is Basis, Subject to prior sale or deletion," and that some individual items are offered "Subject To, and may require final seller approval."